close
close
th 28
News

How To Measure A Western Saddle Bars

How To Measure A Western Saddle Bars. When it comes to measuring a western saddle seat size, simply measure from the base of the horn to the edge of the. 6 1/4″ to 6 3/4″ (has a flatter pitch than quarter horse bars) the.

Measuring, Describing, and Knowing Your Own Western Saddle
Measuring, Describing, and Knowing Your Own Western Saddle from www.pinterest.com

Similar to sizing your seat, the measurement of a western saddle seat is different from an english saddle seat. Stirrups can be adjusted, but you don't want extra leather hanging loose. This makes a channel that runs the length of the saddle and the horse’s back.

When Measuring, Make Sure You’re Underneath The Bars, Not In Front Of The Saddle.

The first is across the arch of the gullet, the second is a bit lower across at the conchos, the third is down lower trying to feel for the bottom of the bars of the saddle and the last photo, you can also feel across the bottom of the saddle and feel for where. A western saddle has bars that rest on the horse’s body about two inches below and on either side of the spine. Peek between the skirts in the front and find the connection between the top of the saddle bars where they connect to the pommel.

You Measure Your Western Saddle’s Gullet By Stretching A Tape Measure From Concho To Concho Across The Front Of The Saddle Directly Below The Pommel.

Tree size is determined by the angle of the gullet. Measure the gullet by stretching a measuring tape from concho to concho across the front of the saddle, not over the top. This is the most common factor because we can measure it more easily.

The Gullet Width Should Be About The Same Width Of The Wither's, Approximately 2 Below The Top Of The Withers.

Similar to sizing your seat, the measurement of a western saddle seat is different from an english saddle seat. Gullet width or sometimes referred to as bar spread is the measurement 2 inches below the narrowest part of the gullet, even with the side conchos. This is one of the reasons why what is marked on the back of the fork is not what is measured across the tops of the bars.

Place Your Tape Ever So Slightly Below That Joint On The Inside Of The Gullet On The Fleece And Measure Across To The Other Side In The Same Place.

First, sit in the middle of the pocket with your stirrups adjusted correctly. How to measure a horse for a saddle: It is measured at the front of the saddle.

Measure The Seat Of A Western Saddle.

The western saddle is meant to be positioned right behind the shoulder bone, or scapula, of your horse. This makes a channel that runs the length of the saddle and the horse’s back. Standard measurements for gullets described in horseman’s handbook of western saddles are:

Leave a Reply

Your email address will not be published.